Standalone data acquisition unit

Temperature, humidity, pressure: 12 channels monitored from your browser.

DaqBox continuously records measurements from Sensirion miniature sensors, at the rate you choose. You view the data and produce your reports from any PC on the network, with no software to install.

Request a quote See the specifications Download the brochure (PDF, French)

12 RJ45 channelsSensirion sensorsEmbedded web interface

Front view of the DaqBox unit, with its Ethernet port and 5 V power input

The need

Monitor a climate without reading measurements by hand.

A cellar, a drying room or a thermal test bench needs continuous temperature and humidity monitoring, often at several points. Multiplying standalone loggers means reading them one by one and cross-checking files. DaqBox brings up to 12 sensors together on a single unit.

Before

Scattered standalone loggers, manual readings, proprietary software to install on every workstation.

With DaqBox

A single unit connected to the network, an adjustable recording interval, all 12 channels available from any PC.

Key features

From probe to report, everything happens in the unit.

Acquisition

12 measurement channels

Each sensor plugs into a numbered RJ45 port. Temperature, humidity and pressure can be freely combined to suit your installation.

SHT35SHT75SHT85Absolute pressure

Recording

Standalone operation

The unit records and serves data without a PC permanently connected. You set the number of measurements per minute, up to one measurement per second.

Adjustable interval1 s minimumOnboard storage

Web interface

No software to install

An embedded web page gives access to the settings: time, IP configuration, number of records already stored and remaining disk space.

Standard browserIP setupStorage monitoring

Analysis

Measurement reports

Recorded data is the basis for precise reports, to document a storage period, a drying cycle or a test campaign.

HistoryReports

12RJ45 measurement channels

1 sminimum acquisition interval

5 Vpower supply, 450 mA

−20 / +80 °Coperating temperature

DAQBOX · 192.168.1.40Recording · 1 / minSample values

Channel 01 · T13.4°C

Channel 02 · HR72.1%

Channel 03 · T13.9°C

Channel 04 · HR70.6%

Channel 05 · P1013hPa

Channel 06 · T12.8°C

V01 V03

Getting started

Operational in three connections.

The DaqBox sets up without tools or software: the sensors, the network, then the browser.

Connect the sensorsEach probe plugs into an RJ45 channel with its 3 m cable, extendable up to 10 m.
Connect to the networkAn Ethernet cable links the unit to your network or directly to a PC. Power is 5 V.
Open the interfaceEnter the DaqBox address in a browser, set the time and the rate, and recording starts.

Rear of the DaqBox with its 12 RJ45 ports numbered 1 to 12 — **A compact 120 × 103 × 53 mm unit.** The 12 RJ45 ports are numbered on the rear panel, the Ethernet port and power input are on the front. A filter cap is available to protect SHT35 sensors.

Use cases

Wherever climate is measured continuously.

T° · %HR

Wine cellars

Temperature and humidity monitoring at several points in the cellar, with a history for each zone.

T° · %HR

Cigar humidors

Permanent control of relative humidity and temperature in storage areas.

T° · %HR · hPa

Drying tunnels

Measuring conditions along the tunnel to track and document each drying cycle.

T° · %HR · hPa

Thermal experiments

Instrumentation of test benches and measurement campaigns in the thermal field.

Sensors and accessories

Sensirion sensors, ready to plug in.

Our engineering team regularly adds new features and new sensors to the range.

256-011

SHT35

Humidity±1,5 %HR
Temperature±0,1 °C

256-013

SHT85

Humidity±1,5 %HR
Temperature±0,1 °C

256-010

SHT75

Humidity±1,8 %HR
Temperature±0,2 °C

256-012

Absolute pressure

Range260–1260 hPa
Accuracy±1,5 hPa

Order references

Code	Product	Description
Unit
256-001	DaqBox (without power supply)	12-channel acquisition unit
256-100	DaqBox power supply	5 V power supply for DaqBox
Sensors
256-010	SHT75 sensor	Temperature and humidity, ±1.8 %RH and ±0.2 °C
256-011	SHT35 sensor	Temperature and humidity, ±1.5 %RH and ±0.1 °C
256-012	Absolute pressure sensor	Ultra-compact, 260 to 1260 hPa, ±1.5 hPa
256-013	SHT85 sensor	Temperature and humidity, ±1.5 %RH and ±0.1 °C
256-101	SHT2x / SHT3x filter cap	Protective filter for SHT35 sensor
Cabling
256-050	DaqBox RJ45 cable, 3 m	Connects sensors to the DaqBox
256-051	DaqBox Dupont cable, 3 m	Sensor connection, Dupont termination
256-060	RJ45 extension, 3 m	Extension for DaqBox cable
256-061	RJ45 extension, 5 m	Extension for DaqBox cable
256-062	RJ45 extension, 10 m	Extension for DaqBox cable
256-070	Ethernet cable, 3 m	Connects the DaqBox to a network or a PC

The unit is delivered without a power supply: remember to add reference 256-100.

Technical specifications

The DaqBox in numbers.

Electrical

Power supply5 V
ConnectorMini USB
Consumption450 mA

Mechanical

Dimensions120 × 103 × 53 mm
Sensor connectors12 × RJ45
NetworkEthernet RJ45

Environment

Storage−10 à +60 °C
Operation−20 à +80 °C

Functional

Number of channels12
QuantitiesT°, %HR, hPa
Min. acquisition interval1 s

The manufacturer

DaqBox is designed by Step AT.

Step AT is an engineering company based in La Seyne-sur-Mer, specialized in data acquisition, LabVIEW development and Edge computing. For larger industrial projects, Step AT also publishes UDS Atom, an Edge software that collects and delivers production data to the information system.

A quote for your installation.

Tell us the number of measurement points and the quantities to monitor: we will propose the right sensor and cable configuration.

Request a quote All products